Product Overview
Features
- Epoxy coated anodized aluminum enclosure
- Available in optional 316 stainless steel enclosure for extremely corrosive conditions
- Universal voltage solenoid and switching
- Convenient push button switch setting
- Robust solenoid valve with standard rebreather
- Diagnostic versions available
- Space efficient design
- Rebreather system minimizes corrosive ingestion for single-acting actuators
- Diagnostic versions aid in trouble-shooting and anticipate problems to increase plant uptime and reduce maintenance costs
- Compact design minimizes valve-actuator assembly dimensional envelope
Applications
- Automated On/Off valve applications in hazardous process environments
- Corrosive and wash down process environments
- Chemical process
- Pharmaceutical and biotech
- Marine & offshore
- Oil & gas
- Agri-processing
Control and monitor an automated on/off valve in all process areas
The Axiom monitors and reports valve position with Visual indicator and signals to the controller. The Axiom AX has integral single or dual coil solenoid valves to control position of the actuated valve.
Exceptional reliability
The Axiom is designed to perform reliably in adverse conditions. Its non-contact position sensing system, with fully potted and sealed electronics, is completely protected inside the water-tight explosionproof enclosure. The integral pneumatic control is tolerant of contaminants and able to operate on standard plant air. A rebreather capability is also standard, eliminating potential ingestion of outside contaminants into the spring side of single-acting actuators.
Space efficient design
The Axiom AX encloses all electrical components in an explosionproof compartment with less than 5” (130 mm) clearance requirement above the top of the actuator. Additional clearance for cover removal is less than 2” (50 mm) because there is no shaft to lift over. The automated valve spacing envelope is minimized without compromising performance or maintainability.
Universal application
One conventional model will satisfy most applications with standard 20 to 125 VAC or VDC monitoring feedback and solenoid control. Standard models also feature high flow 5-way, 2-position pneumatic control suitable for both single- and double-acting actuation. Bus communication models offer the same pneumatic control and have pilots tuned for very low power consumption minimizing voltage drops on long cable runs.
